Mannington MR-710 Premium Urethane Sports Flooring Adhesive

Description

Mannington MR-710 Premium Urethane Sports Flooring Adhesive 2 & 4 Gallon Pails

Mannington MR-710 is a single-component, premium urethane adhesive formulated for installing Mannington Commercial Reset Recycled Rubber Sports Flooring in both tile and sheet formats. This ready-to-use, solvent-free adhesive delivers a strong, durable bond capable of handling the demands of athletic, fitness, and multipurpose commercial environments.

Installers appreciate MR-710 for its smooth trowelability, consistent working time, and dependable performance over properly prepared substrates. With a working time of 3060 minutes depending on temperature and humidity, the adhesive provides flexibility on the jobsite while maintaining the bond strength required for heavy foot traffic and equipment loads.

• Premium urethane adhesive for Reset rubber sports flooring (tile & sheet)
• Single-component formula; no mixing needed
• Low VOC, solvent-free, and non-flammable
• Freezethaw stable for reliable storage
• 3060 minute working time depending on jobsite conditions
• Suitable for use over clean, dry, structurally sound substrates
• Available in 2-gallon and 4-gallon pails

Coverage:
Approx. 95 sq. ft. per gallon when applied with a 1/16″ 1/16″ 1/16″ square-notch trowel Coverage per gallon is identical regardless of pail size.

Surface Preparation:
Substrates must be structurally sound, smooth, level, clean, and free of contaminants including dust, grease, paint, curing compounds, release agents, or old adhesive residues. Maintain temperature between 6585F and relative humidity between 30%60% for 48 hours before, during, and after installation.

Concrete moisture limits:
8 lbs / 1000 sq. ft / 24 hours (ASTM F1869) 90% RH (ASTM F2170) qualifying standard if both tests are run MR-710 is not suitable for substrates with moisture intrusion, hydrostatic pressure, or slabs lacking a proper vapor retarder.

Installation Notes:
Apply adhesive with the recommended trowel at a 45 angle. Verify adhesive transfer by lifting flooring periodically. Protect areas from light traffic for 12 hours and heavy traffic for 24 hours.

Cleanup: Remove fresh adhesive immediately with a white cloth and mineral spirits. Once cured, MR-710 is extremely difficult to remove.

Packaging & Ordering:
2-Gallon Pail SKU: R710G2
4-Gallon Pail SKU: R710G4
Each variant includes the same adhesive formula, performance characteristics, and application requirements.

MR-710 is manufactured to strict quality control standards and carries a one-year shelf life when stored unopened in a climate-controlled space between 5090F.