Description
LORD 201/19. LORD 201 Acrylic Adhesive with LORD Accelerator 19 is a two component adhesive that is used to bond prepared or unprepared plastics, ceramics, and metals. It is resistant to UV exposure, weathering, temperature, oils, and dilute acids.
- 50ml part number is 3020987
- 225ml part number is 3020500
- 5-8 minute set time
- 12-16 minute time to handling strength
- Medium-Thin Viscosity, flowable
Features and Benefits
- Bonds Unprepared Metals requires little or no substrate preparation.
- Versatile bonds a wide variety of substrates such as metals, ceramics and plastics; insensitive to minor deviations from correct mix ratio.
- Self-Leveling flows into hard-to-reach places and is excellent for bonding irregular shapes.
- Temperature Resistantperforms at temperatures from -40F to +300F (-40C to +149C).
- Environmentally Resistantresists dilute acids, alkalis, solvents, greases, oils and moisture; provides excellent resistance to indirect UV exposure, salt spray and UL Rated when mixed with LORD Accelerator 19, adhesive system is UL 746C certified.
| Typical Use: | Offers excellent adhesion to unprepared metals, ceramic magnets and plastics. Semi-flexible, medium cure, medium viscosity. |
| Chemical Composition: | Base: Methacrylate; Accelerator: Epoxy resin |
| Color: | Tan |
| Components: | 2 part |
| Cure System: | Room Temperature |
| Cure Time: | 24h @ room temperature |
| Flash Point: | Base: 18 C; Accelerator: 93 C |
| Mix Ratio: | 10:5 by volume |
| Service Temperature: | -40 to 149 C |
| Viscosity: | 15,000 to 55,000 cp @ 25 C |
| Working Time: | 5 to 8min @ 24 C |
Reviews
There are no reviews yet.