SynthoGlass ESN-202-7IN (previously known as Syntho-Steel) – Steel-Reinforced Epoxy Putty (NSF61 & BS6920 compliant for drinking water contact)

Description

CS-NRI ESN-202-7IN (previously known as Syntho-Steel) is a two-part, steel reinforced epoxy putty. It cures in minutes and can repair most anything made of metal, masonry, wood, ceramic, glass and plastics.

ESN-202-7IN (previously known as Syntho-Steel) contains no solvents, is non-toxic and easily prepares for application. Unlike liquid epoxies, ESN-202-7IN will not drip or sag and will set on wet surfaces. NSF61 and BS6920 compliant for use with potable water. When fully cured the material produces a durable, resilient bond resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases.

ESN-202-7IN is widely used for pipeline repairs in various industries.

Typical Applications:

• Repair leaking water pipes
• Seals leaks in oil and water tanks
• Plug holes and seals
• Fill corrosion voids
• Designed for low pressure leaks

Typical Applications

• Impact Protection
• Emergency Repair
• Corroded Pipes
• Irregular pipe fittings
• Force Mains and gravity lines
• Joint and Tee repair
• Underwater repair and splash zone

Physical Properties

• Temp Sustained/Continuous: 250F (121C)
• Temp Spikes/Intermittent: 300F (149C)
• Density: 2.2 lb/gal, 18.5gm/cm3
• Electrical Resistance: 30,000mega-ohms
• Solids Content: 100%
• Chemical Resistance: Resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases.
• Length: 7″
• Weight: 115g

Physical Properties:

• Density : 15.8 lb/gal (1.9 gm/cm3)
• Compression Strength : 18,000 psi or 1241 bar
• Tensile Strength : 6000 psi or 413 bar
• Modulus of Elasticity : 6×106 psi
• Shear Strength : 700 psi (48 bar)
• Hardness (Shore D): 85
• Maximum Use Temperature : 300 degrees F (149 degrees C)

Electrical Properties :

• Volume Resistivity : 5X1016 ohm-cm
• Dielectric Strength : 400 volts/mil @0.125 in

Working Time

• 5 Minutes at 75F (24C)

Shelf Life

• 24 months with recommended storage

Storage Conditions

• Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials, food and drink. Storage at temperature between 64F and 86F. Keep away from humidity and water. Keep container tightly closed and sealed until ready for use.