Description
Henkel Syntho-Plug Hull & Hole Damage Repair Kits
Syntho-Plug is a critical damage control device designed to instantly stop leaks in boat hulls, fuel tanks, and industrial drums. Available in “Golf Ball” (1.5″ OD) and “Football” (3.5″ x 6″) profiles, these plugs consist of a pliable, open-cell polyurethane foam impregnated with a water-activated resin. Unlike rigid wooden plugs that only fit perfectly round holes, the Syntho-Plug starts soft, allowing it to be compressed and stuffed into irregular, jagged, or oval-shaped breaches ranging from 5/16″ to 2″ in diameter. Once inserted, contact with water triggers a chemical reaction that cures rock-hard in minutes, reducing flow to under 1 GPM and creating a durable mechanical seal until permanent repairs can be made.
Categories: INDUSTRY, ENERGY SECTOR, MARINE, OFFSHORE
| Part Number | Wrap Size Width (in) & Length (ft) | Pipe Size coverage by wrap |
|
SP356 (Football) PN: 33991 |
3.25in x 6in oval football shape | to 1 in |
| SP635 (Golfball) | 3.25in x 3.25in round golfball shape | 1 to 2 in |
Technical Specs
| Color | Foam Yellow, Urethane White |
| Cure Time | 2 Minutes at 75F (24C) |
| Resin Type | Pre-impregnated |
| Application Temperature | 0 to 71C |
- Football Shape: 3.25 inch x 6 inch
- Golfball Shape: 1.5 inch round
Typical Applications
- Fast temporary Sealing of purchured or breaches in hulls, tanks, and large containers.
- Emergency Repair
- Underwater repair and splash zone
Benefits
- Ready to use
- No mixing or mess
- Needs no special tools
- Environmentally safe
- No VOCs
- Delivers simple, effective, durable repir/restoration
- Completely cures in minutes
Physical Properties
- VOCs: None
- Set Time: 30 Minutes at 75F (24C)
- Resin Type: Water-activated polyurethane
- Resin Application: Pre-impregnated
- Service Temperature: -50 to 250F (-45 to 121C)
- Application Temperature: 32 to 150F (0 to 65C)
- Pressure once cured w/primary sealant: Max 300 psi (20.6 bar)
- NSF61 and BS6920 approved for potable water when Syntho-Steel is used as the primary sealant
Working Time
- 2 Minutes at 75F (24C)
Shelf Life
- 24 months with recommended storage
Storage Conditions
- Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials, food and drink. Storage at temperature between 64F and 86F. Keep away from humidity and water. Keep container tightly closed and sealed until ready for use.
Reviews
There are no reviews yet.