Description
Eastons 4mm 8/32 Aluminum Half-Out is machined out of Aerospace 7075-T6 alloy and provides an affordable option for standard thread 8-32 broadheads and field points to be used with most of Eastons 4mm Carbon, 4mm FMJ, and 4mm A/C shafts. Weighing 50 grains and available in 5 sizes to fit a wide range of spines, the half out utilizes a collared design at the connection point of the shaft for increased strength and a precise fit.
Easton recommends that only 2-part Epoxy (No Quick Bond or any other CA adhesives) be used in order to maximize the strength and durability of the component.
FEATURES:
7075-T6 Aerospace Alloy Construction
50 grains
Non-Reflective Black Anodize Coating
Utilizes a two-point interface for increased strength and precise fit
4MM FMJ CHART
| SIZE | SHAFT WEIGHT (GPI) |
SPINE @ 28″ SPAN (DEFLECTION IN INCHES) |
STOCK LENGTH (INCHES) |
DEEP SIX FIELD POINT 100 GRAINS (OPTIONAL) |
8-32 FIELD POINT (INCHES) |
O.D. (INCHES) |
4MM HALFOUT (SIZE) |
4MM NOCK COLLAR (SIZE) |
|---|
| 400 | 9.8 | 0.400 | 31.5 | DP6-5 | 5/16 | 0.234 | #2 | #5 |
| 340 | 11.0 | 0.340 | 32 | DP6-5 | 5/16 | 0.240 | #3 | #6 |
| 300 | 11.7 | 0.300 | *32.5 | DP6-6 | 5/16 | 0.244 | #4 | #7 |
| 250 | 12.3 | 0.250 | *33 | DP6-6 | 5/16 | 0.247 | #5 | #8 |
4MM AXIS CHART
| SIZE | SHAFT WEIGHT (GPI) |
SPINE @ 28″ SPAN (DEFLECTION IN INCHES) |
STOCK LENGTH (INCHES) |
DEEP 6 FIELD POINT 100 GRAINS (OPTIONAL) |
8-32 FIELD POINT (INCHES) |
O.D. (INCHES) |
4MM HALFOUT (SIZE) |
4MM NOCK COLLAR (SIZE) |
|---|
| 250* | 9.8 | 0.250 | *33″ | DP6-6 | 5/16 | 0.244 | #4 | #7 |
| 300* | 9.3 | 0.300 | *32.5″ | DP6-6 | 5/16 | 0.241 | #3 | #6 |
| 340 | 8.3 | 0.340 | 32″ | DP6-4 | 5/16 | 0.234 | #2 | #5 |
| 400 | 7.6 | 0.400 | 31.5″ | DP6-4 | 5/16 | 0.229 | #1 | #4 |
Reviews
There are no reviews yet.