Description
MixPac MGQ 08-24T – Quadro Square 24-element Low-Waste Bell-Style – for 200ml, 400ml, 600ml, 1500ml 2-Part cartridges. Universal mixing nozzles / tips (5-inch 24-element Mixing Nozzles) for all standard C-System (Bell-Style) 2-Part epoxy and adhesive cartridges.
Specifications:
- 8mm inner diameter
- 7-inch nozzle length
- 24-element count (24 mixing cycles for the material)
- Square Quadro style nozzle tube, for less-waste and more efficient mixing
- Integratee Nut style inlet fitting, where u just screw the nozzle on.
- For Medium and Thicker viscosities, 10,000 cP or higher
- Recommended for Epoxy, Silicone, Urethane, Acrylic, Polyesters
- Not recommended for Urethanes and Polyturethanes
Works perfectly with all major branded adhesives that use the Bell-Style (C-System) adhesive cartridges, including C-system cartridges by MixPac, and 2k cartridges by Nordson EFD. Each Pack includes the same number of mixing nozzles plus the related inner/inside mixing assembly
MixPac MGQ 08-24T Square Quadro Mixing Nozzles are used to dispense 2-part adhesives from 200ml, 400ml, 600ml and 1500ml C-System plastic cartridges, and works with both 1:1 and 2:1 ratio formulas.
The Square Quadro design (also known as ‘turbo’) allows for maximum mixing in a smaller, shorter footprint. This allows users to get closer to the materials they are bonding and also leaves less wasted material in the mixer.
This mixer is connected with a bell outlet and has a stepped tip that can be cut to adjust the amount of adhesive being dispensed.
Use these mixers with: Epoxy, Silicone, Urethane, Foam Urethane, Acrylic, Polyesters
Reviews
There are no reviews yet.