MoTeC LTC (Lambda-to-CAN) Module

Description

MoTeCs Lambda to CAN (LTC NTK) modules monitor, control and diagnose NTK Lambda sensors, transmitting readings on a CAN bus. When multiple LTC NTKs are used, up to 32 Lambda sensors can be configured on a single CAN bus, allowing an ECUor logging device to simultaneously monitor numerous Lambda sensors.

Sensor compatibility (Please select your required sensor type from the drop down list)

• NTK, 5 wire sensor
• Bosch LSU 4.9

BASIC SPECIFICATIONS

Inputs/Outputs

• 1 x NTK Lambda sensor (MoTeC #57007)
• Power supply voltage 11 V 16 V
• Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A 1 A and up to 2 A on startup)

Communications

• 1 x CAN at 1 Mbit/sec

Connectors

• 1 x 4 pin male DTM connector (power/CAN)
• 1 x mating connector forLambda Sesnor (Each if applicable)

Physical

• Dimensions 38 x 26 x 14 mm excluding wiring looms and connectors
• Weight 62 grams
• Maximum ambient temperature 100 C

SensorsNOT included.