Description
Permabond MS359A is a low viscosity, self-levelling single-part MS Polymer. A moisture cure sealant type product which cures slowly from the outside in to form tough, yet flexible, bonded joints.
Grey in colour, MS359A can be used to bond most materials including wood, metal, glass, plasterboard wood, metal, glass, plasterboard and a wide range of plastics.
Permabond MS Polymers are single component, hybrid technology adhesives that moisture cure at ambient temperature. The high elongation and flexible nature of these strong bonds meet the demands of stress from impact, peel, and expansion that can occur when bonding dissimilar materials. They have excellent environmental resistance and remain very flexible.
As this formula is moisture cure, the cure time will depend on humidity and moisture in the air and on the substrate surface.
Features & Benefits
- Self Leveling:10,000 to 25,000 cP
- Low Viscosity, flowable, will drip, will form to a cavity.
- Free from solvents, isocyanates, silicones and PVC compounds, non-corrosive
- Cures at room temperature
- Set time 10 – 20 min
- Time to handling strength about 1-2 hours
- Full Cure in 24 hours
- No mixing required, cures by moisture in the atmosphere, in the air.
- Can be painted after curing
- Suitable for a variety of surfaces
- Primer free
- Easy to apply
- Versatile weather resistant
Compatible Surfaces
- Steel: 1-2 MPa (150-290psi)
- Aluminium: 1-2 MPa (150-290psi)
- Zinc: 1-2 MPa (150-290psi)
- PVC: 1-2 MPa (150-290psi)
- Polycarbonate: 0.5-1 MPa (70-150psi)
- Polystyrene: 0.5-1 MPa (70-150psi)
- Wood: 1-2 MPa (150-290psi)
- Most Fabrics
- All woods
- All metals
- Epoxy finishes
- All Hard Plastics (like ABS, PVC, Acetal, etc)
- Not compatible with soft, rubbery, or polyolefins like (PP, HDPE, PE, LDPE, UHMW)
Reviews
There are no reviews yet.