Description
The number one complaint of the Axcel Driver is the elevation knob is too tight to the sight body…
Well, problem solved.
RM3D has come up with a solution to move the wheel away from the body , cover the gears from debris(no need for a hubcap), increase the size of the wheel for a better gear ratio, and color match to your existing sight.
-INSTALL INSTRUCTIONS-
- Remove the rubber portion of your current dial
- Place the new dial against the current dial “driver” will be in the center of your new dial. You will notice on the original dial there is notch, rotate the new dial until the post falls into the notch.
- Final step: Secure the screws. Use a 5/64th Allen key. Start your screws slowly to ensure there’s less chance of stripping.
Reviews
There are no reviews yet.