Description
SciGrip SG230HV Gray is a 10:1 MMA-based, high viscosity adhesive with an excellent balance of strength and toughness for bonding a wide range of substrates with little to no surface preparation.
Features & Benefits
- 60-Minute working times
- Excellent choice for bonding FRP composites with little or no surface preparation
- Outstanding sag resistance
- Excellent fatigue, impact and shock load resistance
- Outstanding environmental and chemical resistance
- Bonds a range of substrates: Acrylic, PVC, Thermoset Composites (Vinylester, Polyester, Gelcoats, and Epoxy), Primed Metals
- All metals require a primer
| RECOMMENDATIONS & SURFACE PREP | |||
|---|---|---|---|
| Best | Test | Primer | Prep |
| METALS | |
|---|---|
| Aluminum | |
| Coated/Painted Metals | |
| Plated Metals | |
| Sheet Metal | |
| Stainless Steel | |
| Cold Rolled Steel |
| THERMOPLASTICS | |
|---|---|
| Acrylics | |
| Vinyls (PVC) |
| THERMOSET COMPOSITES | |
|---|---|
| Fiberglass | |
| Gelcoats | |
| RTM & RTM Light |
What Are You Bonding Together?
Try Substrate Match
In the Product Finder
SPECIFICATIONS & AVAILABILITY
Working Times
| Adhesive | Gap Fill Inch (mm) |
Working Time min. |
Fixture Time |
|---|---|---|---|
| SG230HV | 0.02-2 (0.50-50) | 50 to 70 minutes | 140-170 minutes |
Typical Physical Properties
| Adhesive | Ratio A:B Volume Weight |
|---|---|
| SG230HV | 10:1 |
Typical Cured Properties
| Adhesive | Tensile Strength psi (MPa) %Elongation |
Shear Strength psi (MPa) |
|---|---|---|
| SG230HV | 3,000-3,500 (21-24) 100-150% |
2,200-2,500 (15-17) |
Reviews
There are no reviews yet.